From new construction cladding to emergency storm repairs, Forge Siding delivers field-tested Siding across Hillsboro and the surrounding OR service area. Call today for a free on-site estimate.
What separates our Hillsboro operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
We work on everything from single-family homes in residential neighborhoods to commercial cladding on multi-family buildings and light industrial structures across OR. If it involves protecting a building's exterior envelope, we have the tools, the certifications, and the track record to handle it properly.
Every Forge Siding project in Hillsboro, OR comes with a written workmanship warranty. Not a verbal assurance — an actual document with our license number, a defined coverage period, and a clear process for raising any concern after project completion.
Most siding problems start small and quiet — a missed fastener, a failed caulk joint, a crack that looks cosmetic. By the time interior moisture damage appears, the repair scope has usually doubled. Watch for these early signals.
Hairline fractures in vinyl or fiber cement are entry points for water. Even a small crack at a window corner can let moisture work into sheathing within a few rain cycles.
Water staining on drywall near exterior walls is one of the clearest indicators of a failed building envelope. By the time interior damage is visible, moisture has usually been active behind the cladding for weeks or months.
Warped vinyl often means panels were installed too tight — no expansion room for thermal movement. Over time, buckling creates gap points where panels separate at the lock, letting wind and water in.
Paint peeling from the outside isn't always a paint problem — it's frequently caused by moisture migrating through the panel from the unpainted back face. Re-painting without addressing the back-face moisture cycle just delays the failure.
Fastener issues are quiet until they're catastrophic. A section that blows off in a windstorm — and the water damage that follows — costs far more to fix than a fastener re-drive.
Air leakage through a compromised siding system can account for 10–20% of HVAC load. Addressing the envelope often produces measurable utility savings alongside the repair value.
Every service below is performed by our own licensed crews — not passed off to a subcontractor network. We carry the tools, the product certifications, and the field experience for every scope we quote.
New siding installation covers everything from the housewrap to the trim: starter strip, flashing at all penetrations, panel installation per manufacturer spec, and finishing trim at corners, windows, and the roofline. We work on new construction alongside GCs and handle full tear-off replacements on existing homes. Our Hillsboro, OR crews are certified on vinyl, fiber cement, engineered wood, and steel panel systems — and we carry each product's installation manual on every job.
Siding repair in Hillsboro, OR covers a wide range of conditions: hail and wind damage after storms, impact holes from debris or accidents, failed caulk joints allowing water infiltration, loose or blown-off panels, and moisture-driven substrate damage that requires sheathing repair before new cladding can go on. Our dispatch line handles emergency calls — we triage exposure risk over the phone, deploy a crew for same-day assessment in urgent situations, and provide temporary board-up service when panels are missing and rain is in the forecast.
Each cladding material has its own installation requirements, failure modes, and maintenance profile — and a crew that treats them all identically is a crew that will make material-specific mistakes. Our Hillsboro, OR specialists understand fiber cement's silica cutting protocols and back-priming requirements, vinyl's thermal expansion characteristics and lock-engagement tolerances, and wood's moisture content sensitivity and end-grain sealing needs. We don't sell you a product and then install it generically.
Property managers and HOA boards working with us get a dedicated project point of contact, building-by-building scheduling, and standardized documentation — including permit records, warranty registrations, and post-project photo files — formatted for HOA board records and reserve fund reporting.
On replacement projects, we replace trim components that are damaged or compromised regardless of the primary panel material — because leaving old, failing trim behind a new siding installation creates the exact problem the new siding was supposed to solve.
Post-storm inspections document hail and wind damage at panel face level — the kind of close-range documentation that insurance adjusters need for a full-scope claim approval. We've helped Hillsboro, OR homeowners recover adjuster-approved claim settlements that significantly exceeded initial offers, simply by providing specific panel-level evidence instead of general descriptions.
There are plenty of siding contractors in OR. Here's what separates the ones worth hiring from the ones who cost you twice — once for the job and once for fixing what they did wrong.
Every estimate we write lists materials, labor, and any permit fees as separate line items. You know what you're paying for before signing anything — no lump-sum guesses that hide markup.
Our OR dispatch operates from locally based crews — not a regional office routing jobs to whoever's available statewide. That means faster arrival windows, familiarity with local permit offices, and crews who understand Hillsboro, OR building code requirements.
Our OR contractor license number is provided at first contact. Look it up in the state database before signing anything — we encourage it. We carry current general liability and workers' compensation; certificates are available on request.
Every completed project comes with a signed workmanship warranty document — not just a promise. It specifies what's covered, for how long, and the process for raising a concern. We also register all material warranties in your name at project completion.
We sweep for fasteners and nails every afternoon before leaving, protect landscaping and driveways with staging tarps, and haul debris off-site rather than leaving a roll-off on your driveway for weeks.
Every Forge Siding project in Hillsboro, OR closes with a documentation package: permit records, manufacturer warranty registrations, post-project photos by elevation, and our workmanship warranty. That file is useful for insurance claims, home sales, and HOA records long after the project ends.
No mysteries, no moving goalposts. The same documented process runs on every project we take in OR.
Call our Hillsboro, OR dispatch line or request a callback. We schedule a free on-site assessment within 24–48 hours, measure every relevant surface, document existing conditions, and note any substrate concerns before quoting.
The estimate is a document, not a handshake. It lists every component — panels, trim, housewrap, fasteners, labor, permit fees — so you know exactly what's included before signing.
Where permits are required in OR, we handle the application, filing fee, and inspection scheduling. Your confirmed start date is put in writing and we communicate proactively if anything changes — you don't have to follow up with us.
The lead installer contacts you each morning to confirm the day's scope and each afternoon to report what was completed. If the inspection uncovers unexpected substrate conditions, you hear about it same-day with a written change order before we touch anything additional.
The walkthrough isn't a formality. If anything isn't right, we note it and fix it before considering the project closed. Our reputation runs on completed projects, not signed contracts.
If our workmanship doesn't meet the standard we committed to in writing, we come back and make it right at no additional charge. That's not a marketing statement — it's the language in our warranty document, signed at project close. Our Hillsboro, OR clients get a document they can actually reference, not a slogan.
Talk to a Hillsboro, OR Specialist NowThree bids, three different approaches. Forge Siding was the only contractor who showed up with a moisture meter at the estimate visit and flagged elevated readings behind our north-facing panels before we even discussed product. That kind of diagnostic thoroughness sold us immediately.
Emergency call on a Saturday night after wind blew off eight panels on the back wall. Someone actually answered. Crew was on site Sunday morning, boarded up the exposed section, and had permanent panels installed by Tuesday. I'd been skeptical of "24/7" claims from other contractors — this is what it actually looks like.
I manage a 34-unit HOA community in Hillsboro, OR. Coordinating siding work across occupied buildings requires planning most contractors don't have. Forge Siding did building-by-building scheduling, communicated directly with residents about staging dates, and completed the project three days ahead of the contracted timeline. Comprehensive documentation delivered before final payment was due.
Fiber cement installation — the back-priming, the fastener schedule documentation, the warranty registration process — was handled exactly as the manufacturer requires. Our close-out package has the Preferred Contractor registration and the complete fastener log. The 30-year warranty is in force.
The crew found rotted sheathing on the west wall during tear-off. Called me immediately, showed me exactly what they found with photos, and gave me the change order before touching anything. The whole process was transparent from start to finish — that's exactly how contractors should handle unexpected conditions.
The daily communication system — a morning text with the day's plan and an afternoon report of what was completed — kept me in the loop without requiring me to check in on them. They finished on schedule and the property was completely clean when they left for the last time.
Forge Siding provides residential and commercial Siding across the full Hillsboro, OR service area from our local Hillsboro dispatch base. We're familiar with local building codes, permit requirements, and contractor licensing standards across OR — no learning curve on your project, no out-of-area crew navigating unfamiliar conditions on their first day.
Currently active in: 97006 97123 97124 97129 and surrounding areas
Reach our Hillsboro dispatch line for fast scheduling, honest pricing, and a crew that actually shows up when they say they will.
📞 Call Now: +1-844-782-0929